WhatsApp:+0086-13561638565 E-mail:wenning.li@zbchuangyou.com
Views: 5 Author: Site Editor Publish Time: 2022-07-04 Origin: Site
One is the blister method; the other is the oil infiltration method. Fill the small bottle with water and soak it in water; rub the slightly larger label with cooking oil and soak it.
Ten minutes later, a layer of film on the label of the small bottle in the water can be torn off, and the edge of the oil-soaked large bottle can be scraped off with a fingernail, but the other places are not soaked.
Put the small bottle with the film removed back into the water to continue soaking; continue to apply oil to the larger bottle.
Ten minutes later, I took out the bottle soaked in water and rubbed it with a kitchen steel ball, then it was rinsed clean, and it was as clean as new.
But the oil-soaked bottle is still not scratched in the middle of the label except that the edges can be rubbed off. It can only be soaked in water, and cleaned with steel wool in the same way as for vials.
It can be seen that the easiest way to remove the label of a glass bottle is to use water bubbles, tear the film, soak it again, and lightly brush it.